Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM2170E _59 Vehicle Exterior _057048 WIPER / WASHER _0278177 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  REMOVAL  


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

NOTICE:

Removing the lower steering column cover in the incorrect order will cause the parts to break.


a.

Release the tilt lever, and fully extend and lower the steering column.


b.
E246652

Turn the steering wheel assembly to the left and remove the screw.


c.

Turn the steering wheel assembly to the right and remove the screw.


d.

Remove the screw from the lower portion of the lower steering column cover.


e.
E246651

Disengage the 4 claws and remove the lower steering column cover.


Hide 45286B 2.REMOVE UPPER STEERING COLUMN COVER

a.
E237552

Disengage the 2 claws and remove the upper steering column cover.


Hide 84650 3.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

a.

Turn the steering wheel assembly to the right.


b.
E237553E01
0.134,1.015 0.294,1.166 0.161,0.151 10 *1 0.4,1.224 0.297,1.105 false

Disconnect each connector.

Text in Illustration
*1 Screwdriver


c.

Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

NOTICE:

If the claw is pushed with excessive force, it may break.