85035
1.REMOVE WASHER NOZZLE SUB-ASSEMBLY
85035
2.ADJUST WASHER NOZZLE SUB-ASSEMBLY
Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.
| *a | Discrimination Number |
| Part Number | Discrimination Number | Washer Fluid Injection Angle |
|---|---|---|
| 85381-52430 | 12 | 0° |
| 85381-52440 | 10 | -2° |
| 85381-52450 | 14 | +2° |
85035
3.INSTALL WASHER NOZZLE SUB-ASSEMBLY