85035
1.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for LHD)
Operate the front washer nozzle and check the position that the washer fluid hits the windshield.
Washer fluid hits the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | *d | Measurement |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 28.2 mm (1.11 in.) | B | 257.4 mm (10.1 in.) |
| C | 166.8 mm (6.57 in.) | D | 90.4 mm (3.56 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.
85035
2.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for RHD)
Operate the front washer nozzle and check the position that the washer fluid hits the windshield.
Washer fluid hits the windshield in the areas shown in the illustration.
| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | *d | Measurement |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 20.6 mm (0.811 in.) | B | 273.5 mm (10.8 in.) |
| C | 184.6 mm (7.27 in.) | D | 83.4 mm (3.28 in.) |
If the result is not as specified, replace the washer nozzle sub-assembly.