Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM2170E _59 Vehicle Exterior _057048 WIPER / WASHER _0278181 WASHER NOZZLE(for Rear Side) G

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85345R 1.INSPECT REAR WASHER NOZZLE

a.

Operate the rear washer nozzle and check the position that the washer fluid hits the windshield.

Standard:

Washer fluid hits the windshield in the area shown in the illustration.


E246656E01
2.069,2.213 2.185,2.372 0.116,0.159 10 A 3.212,3.989 3.327,4.148 0.116,0.159 10 B 3.368,4.411 3.486,4.571 0.119,0.159 10 D 3.744,3.989 3.864,4.136 0.120,0.148 10 C 0.576,5.371 0.784,5.549 0.208,0.177 10 *a

Text in Illustration
*a Measurement - -

Standard Clearance:
Area Measurement Area Measurement
A 138.4 mm (5.45 in.) B 130.7 mm (5.15 in.)
C 60.3 mm (2.37 in.) D 191 mm (7.52 in.)