Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2011.12–2014.12
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81560 1.INSTALL REAR COMBINATION LIGHT ASSEMBLY

a.

Engage the grommet.


b.
E237712E02
2.491,0.232 2.651,0.385 0.160,0.153 10 *1 1.988,0.357 2.479,0.322 false 0.943,1.184 1.103,1.336 0.160,0.153 10 *2 2.404,1.131 2.565,1.284 0.160,0.153 10 *1 1.53,0.983 1.143,1.234 false 1.751,1.354 2.388,1.234 false 0.256,0.052 0.416,0.204 0.160,0.153 10 *3 0.856,0.253 0.469,0.154 false 0.218,1.453 0.378,1.605 0.160,0.153 10 *4 0.807,1.574 0.422,1.549 false

Engage the guide and 2 pins to temporarily install the rear combination light assembly.

Text in Illustration
*1 Pin
*2 Guide
*3 Rear Combination Light Guide
*4 No. 2 Rear Combination Light Guide

HINT:

If the pins have a problem such as play, replace the rear combination light guide and No. 2 rear combination light guide with new ones.



c.

Install the rear combination light assembly with the 2 bolts.

Torque:
5.9 N*m (60 kgf*cm, 52 in.*lbf)


d.

Pull the deck trim side panel assembly until the connector of the rear combination light assembly can be seen.


e.

Connect the connector.


f.

Engage the 2 clips to install the deck trim side panel assembly.


g.

Install the bolt.