Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2014.12
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81560 1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

a.
E150954E06
0.229,0.183 0.439,0.367 0.210,0.184 10 *a 0.649,1.959 0.817,2.119 0.169,0.160 10 E 2.633,2.048 2.18,2.048 false 2.677,1.959 2.966,2.119 0.289,0.160 10 B*A 1.258,2.048 0.805,2.048 false 1.608,2.442 1.522,2.872 false 2,2.886 2.142,3.051 0.142,0.165 10 B 1.45,2.886 1.592,3.051 0.142,0.165 10 B 1.876,2.436 2.023,2.866 false 2.464,2.886 2.759,3.051 0.295,0.165 10 B*B 2.131,2.436 2.468,2.866 false 0.934,2.886 1.076,3.051 0.142,0.165 10 B 1.336,2.436 1.033,2.866 false

Apply auxiliary battery voltage to the rear combination light assembly LH and check that the light comes on.

OK:
Tester Connection Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)*1
Auxiliary battery negative (-) → Terminal 1 (E)
The back-up light comes on
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The stop light comes on
Auxiliary battery positive (+) → Terminal 4 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The taillight comes on
Auxiliary battery positive (+) → Terminal 5 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The turn signal light comes on
Auxiliary battery positive (+) → Terminal 6 (B)*2
Auxiliary battery negative (-) → Terminal 1 (E)
The rear fog light comes on


*1: w/o Rear Fog Light

*2: w/ Rear Fog Light


Text in Illustration
*A w/o Rear Fog Light
*B w/ Rear Fog Light
*a Component without harness connected
(Rear Combination Light Assembly LH)

If the result is not as specified, replace the bulb or rear combination light assembly LH.


Hide 81550 2.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

a.
E150954E05
0.229,0.183 0.439,0.367 0.210,0.184 10 *a 0.649,1.959 0.817,2.119 0.169,0.160 10 E 2.633,2.048 2.18,2.048 false 2.677,1.959 2.827,2.119 0.150,0.160 10 B 1.258,2.048 0.805,2.048 false 1.608,2.442 1.608,2.872 false 2.103,2.886 2.245,3.051 0.142,0.165 10 B 1.536,2.886 1.678,3.051 0.142,0.165 10 B 1.876,2.436 2.109,2.866 false 1.02,2.886 1.162,3.051 0.142,0.165 10 B 1.336,2.436 1.119,2.866 false

Apply auxiliary battery voltage to the rear combination light assembly RH and check that the light comes on.

OK:
Tester Connection Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The back-up light comes on
Auxiliary battery positive (+) → Terminal 3 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The stop light comes on
Auxiliary battery positive (+) → Terminal 4 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The taillight comes on
Auxiliary battery positive (+) → Terminal 5 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
The turn signal light comes on


Text in Illustration
*a Component without harness connected
(Rear Combination Light Assembly RH)

If the result is not as specified, replace the bulb or rear combination light assembly RH.