81550L
1.REMOVE REAR TURN SIGNAL LIGHT BULB
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.
Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.
81550F
2.REMOVE TAIL LIGHT BULB
Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.
Remove the tail light bulb from the rear combination light socket and wire sub-assembly.
81550N
3.REMOVE BACK-UP LIGHT BULB (w/o Rear Fog Light)
Disengage the 2 guides and disconnect the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.
Remove the back-up light bulb from the rear combination light socket and wire sub-assembly.
81550Q
4.REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
Disengage the 2 guides and disconnect the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.
Remove the No. 1 rear fog light bulb from the rear combination light socket and wire sub-assembly.
81565
5.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
Disconnect the connector.
Disengage the clamp and remove the rear combination light socket and wire sub-assembly.
81536A
6.REMOVE REAR COMBINATION LIGHT LED
Remove the screw and rear combination light LED.