Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2014.12–2017.06
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81550L 1.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E308372

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550N 2.REMOVE BACK-UP LIGHT BULB (w/o Rear Fog Light)

a.
E308374

Disengage the guide and disconnect the rear combination light socket and wire sub-assembly.


b.

Turn the rear combination light socket and wire subassembly with the back-up light bulb as shown in the illustration to disconnect them as a unit.


c.

Remove the back-up light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550Q 3.REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)

a.
E308374

Disengage the guide and disconnect the rear combination light socket and wire sub-assembly.


b.

Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb as shown in the illustration to disconnect them as a unit.


c.

Remove the No. 1 rear fog light bulb from the rear combination light socket and wire sub-assembly.


Hide 81565 4.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E308376

Disengage the 2 guides.


b.

Turn the rear combination light socket and wire subassembly as shown in the illustration to disconnect them as a unit.


c.

Disconnect the connector to remove the rear combination light socket and wire sub-assembly.