Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2011.12–2014.12
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81536A 1.INSTALL REAR COMBINATION LIGHT LED

a.
E245776

Install the rear combination light LED with the screw.


Hide 81565 2.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E238340

Engage the clamp to install the rear combination light socket and wire sub-assembly.


b.

Connect the connector.


Hide 81550N 3.INSTALL BACK-UP LIGHT BULB (w/o Rear Fog Light)

a.

Install the back-up light bulb to the rear combination light socket and wire sub-assembly.


b.
E237719

Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.


c.

Engage the 2 guides to connect the rear combination light socket and wire sub-assembly.


Hide 81550Q 4.INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)

a.

Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.


b.
E237719

Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.


c.

Engage the 2 guides to connect the rear combination light socket and wire sub-assembly.


Hide 81550F 5.INSTALL TAIL LIGHT BULB

a.

Install the tail light bulb to the rear combination light socket and wire sub-assembly.


b.
E237717

Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.


Hide 81550L 6.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E237715

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.