Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2014.12–2017.06
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.

Connect the connector.


b.
E308377

Turn the rear combination light socket and wire sub-assembly as shown in the illustration to connect them as a unit.


c.

Engage the 2 guides to install the rear combination light socket and wire sub-assembly.


Hide 81550N 2.INSTALL BACK-UP LIGHT BULB (w/o Rear Fog Light)

a.

Install the back-up light bulb to the rear combination light socket and wire sub-assembly.


b.
E308375

Turn the rear combination light socket and wire subassembly with the back-up light bulb as shown in the illustration to connect them as a unit.


c.

Engage the guide to connect the rear combination light socket and wire sub-assembly.


Hide 81550Q 3.INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)

a.

Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.


b.
E308375

Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb as shown in the illustration to connect them as a unit.


c.

Engage the guide to connect the rear combination light socket and wire sub-assembly.


Hide 81550L 4.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E308373

Turn the rear combination light socket and wire subassembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.