Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278199 LICENSE PLATE LIGHT ASSEMBLY G

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81270 1.INSPECT LICENSE PLATE LIGHT ASSEMBLY

a.
E220266E01
0.181,0.169 0.333,0.315 0.152,0.146 10 *a

Connect a positive (+) lead from the auxiliary battery to terminal 1 and a negative (-) lead to terminal 2.


b.

Check that the license plate light comes on.

OK:

The light comes on.


Text in Illustration
*a Component without harness connected
(License Plate Light Assembly)

If the result is not as specified, replace the bulb or license plate light socket and wire.