81952D
1.REMOVE REAR LIGHT COVER
Disengage the 6 claws.
Disengage the 2 claws to remove the rear light cover.
81006
2.REMOVE CENTER STOP LIGHT SET
Disconnect the connector.
Secure a wire around the center stop light set wire harness as shown in the illustration.
| *1 | Wire |
Use a wire long enough so that the center stop light set wire harness can be passed through the rear spoiler assembly during installation.
Remove the 2 screws.
Pull the center stop light set and wire harness to remove the center stop light set.
Do not apply excess force when pulling the wire harness or it may break.
Remove the wire from the old center stop light set wire harness.