52592
1.INSTALL REAR BUMPER SIDE SEAL LH
Install the rear bumper side seal LH with the 2 clips.
52591
2.INSTALL REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52016A
3.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH (w/o Reinforcement)
Install the rear bumper arm sub-assembly LH with the 3 bolts.
52015A
4.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH (w/o Reinforcement)
Use the same procedure as for the LH side.
52016A
5.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH (w/ Reinforcement)
Install the rear bumper arm sub-assembly LH with the 3 bolts.
52015A
6.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH (w/ Reinforcement)
Use the same procedure as for the LH side.
52171A
7.INSTALL NO. 1 REAR BUMPER REINFORCEMENT (w/ Reinforcement)
Install the No. 1 rear bumper reinforcement with the 4 bolts.
52563A
8.INSTALL UPPER REAR BUMPER RETAINER LH
Engage the 2 claws and install the upper rear bumper retainer LH.
Install the screw.
52562B
9.INSTALL UPPER REAR BUMPER RETAINER RH
Use the same procedure as for the LH side.
52576
10.INSTALL REAR BUMPER SIDE RETAINER LH
Engage the guide and 2 claws and install the rear bumper side retainer LH.
Install the screw.
52575
11.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.