Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0278209 REAR SPOILER A

EXTERIOR PANELS / TRIM  REAR SPOILER  INSTALLATION  


PROCEDURE

Hide 76874 1.INSTALL NO. 3 REAR SPOILER PROTECTOR

a.

Wipe off any tape adhesive residue with cleaner.


b.

Remove the release paper from 2 new No. 3 rear spoiler protectors.


c.

Align the 2 new No. 3 rear spoiler protectors with the protrusions and install them.


Hide 76873 2.INSTALL NO. 2 REAR SPOILER PROTECTOR

a.

Wipe off any tape adhesive residue with cleaner.


b.

Remove the release paper from 2 new No. 2 rear spoiler protectors.


c.

Align the 2 new No. 2 rear spoiler protectors with the protrusions and install them.


Hide 76872 3.INSTALL NO. 1 REAR SPOILER PROTECTOR

a.

Wipe off any tape adhesive residue with cleaner.


b.

Remove the release paper from a new No. 1 rear spoiler protector.


c.

Align the new No. 1 rear spoiler protector with the protrusion and install it.


Hide 76871 4.INSTALL REAR SPOILER

a.

Install the No. 1 rear spoiler seal:

i.

Wipe off any tape adhesive residue with cleaner.


ii.

Remove the release paper from 4 new No. 1 rear spoiler seals.


iii.

Align the 4 new No. 1 rear spoiler seals with the protrusions and install them.



b.

Install the rear spoiler seal:

i.

Wipe off any tape adhesive residue with cleaner.


ii.

Remove the release paper from a new rear spoiler seal.


iii.

Align the new rear spoiler seal with the protrusion and install it.



c.

Engage the 3 clips.


d.

Install the rear spoiler with the 4 bolts.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)


e.

Install the 2 plug holes.