Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0278214 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

a.
B298014E02
2.333,0.76 2.875,0.427 2.875,0.427 2.542,0.833 true 2.885,0.333 3.083,0.51 0.198,0.177 10 true *1

Apply protective tape as shown in the illustration.

Text in Illustration
*1 Protective Tape


b.
B298015

Disengage the 2 clips and remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

If any clip is damaged or falls out, replace it with a new one.