Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
75926B
1.REMOVE NO. 3 BLACK OUT TAPE
Using a heat light, heat the No. 3 black out tape and vehicle body.
| Item | Temperature |
|---|---|
| No. 3 Black Out Tape and Vehicle Body | 40 to 60°C (104 to 140°F) |
Do not heat the vehicle body excessively.
Pull back on one of the ends of the No. 3 black out tape to remove it.
When pulling on the stripe, pull it parallel to the body.