Home › Drivetrain › P510 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER › from 2017.06
RM2170E _52 Drivetrain _057013 P510 HYBRID TRANSMISSION / TRANSAXLE _0277995 SHIFT LEVER A

P510 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 35971E 1.REMOVE POSITION INDICATOR HOUSING

a.
C249913

Disengage the 4 claws and remove the position indicator housing from the lower position indicator housing.

NOTICE:

Do not damage the lower position indicator housing.



Hide 35921B 2.REMOVE NO. 2 CONTROL POSITION INDICATOR PLATE

a.
C249914

Disengage the claw and remove the No. 2 control position indicator plate from the position indicator housing.


Hide 35906 3.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C249915

Disconnect the indicator light wire sub-assembly from the lower position indicator housing.


b.
C249917

Disengage the 4 clamps and disconnect the indicator light wire sub-assembly from the lower shift lever assembly.


Hide 35953 4.REMOVE POSITION INDICATOR LIGHT GUIDE

a.
C249918

Disengage the 4 claws and remove the position indicator light guide from the lower position indicator housing.

NOTICE:

Do not damage the lower position indicator housing.



Hide 35975 5.REMOVE POSITION INDICATOR SLIDE COVER

a.
C249919

Remove the position indicator slide cover from the lower position indicator housing.


Hide 35976 6.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C235350

Align the cutouts on the shank of the No. 2 position indicator slide cover and the position indicator slide cover, and remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 35974 7.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C249920

Disengage the 4 claws and remove the lower position indicator housing from the lower shift lever assembly.