Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2017.06
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0278190 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

Hide 81536A 2.INSTALL REAR COMBINATION LIGHT LED (for TAIL LIGHT)

a.

Connect the connector.


b.
E372194

Turn the rear combination light LED as shown in the illustration to install it.


c.

Install the screw.


d.

Engage the guide to connect the rear combination light socket and wire sub-assembly.


Hide 81536A 3.INSTALL REAR COMBINATION LIGHT LED (for STOP LIGHT)

a.

Connect the connector.


b.
E372192

Turn the rear combination light LED as shown in the illustration to install it.


c.

Install the screw.


Hide 81550N 4.INSTALL BACK-UP LIGHT BULB

a.

Install the back-up light bulb to the rear combination light socket and wire sub-assembly.


b.
E372190

Turn the rear combination light socket and wire sub-assembly with the back-up light bulb as shown in the illustration to connect them as a unit.


c.

Engage the guide to connect the rear combination light socket and wire sub-assembly.


Hide 81550L 5.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E372188

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.