71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY
71960B
2.REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
58165F
3.REMOVE FRONT FLOOR COVER RH
Using a clip remover, remove the 2 clips.
Disengage the 3 clips.
Disengage the 3 guides to remove the front floor cover RH.
58166B
4.REMOVE FRONT FLOOR COVER LH
Using a clip remover, remove the 2 clips.
Disengage the 3 clips.
Disengage the 3 guides to remove the front floor cover LH.
58167H
5.REMOVE FRONT CENTER FLOOR COVER
Disengage the 6 guides to remove the front center floor cover.
6.REMOVE REAR SEATBACK ASSEMBLY LH
Fold down the rear seatback assembly LH.
Remove the 2 bolts and rear seatback assembly LH.
Be careful not to damage the vehicle body.
7.REMOVE REAR SEATBACK ASSEMBLY RH
Fold down the rear seatback assembly RH.
Remove the 2 bolts and rear seatback assembly RH.
Be careful not to damage the vehicle body.
8.REMOVE REAR SEAT CUSHION ASSEMBLY
| *a | RH Side |
| *b | LH Side |
Disengage the 2 clips.
Disengage the hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
Be careful not to damage the vehicle body.
72693
9.REMOVE REAR SEAT CUSHION LOCK HOOK
Disengage the 2 claws and remove the rear seat cushion lock hook as shown in the illustration.
Use the same procedure for the RH side and the LH side.