72693
1.INSTALL REAR SEAT CUSHION LOCK HOOK
Engage the 2 claws to install the rear seat cushion lock hook.
Use the same procedure for the RH side and the LH side.
2.INSTALL REAR SEAT CUSHION ASSEMBLY
Place the rear seat cushion assembly in the cabin.
Be careful not to damage the vehicle body.
Push out the seat belt buckles from the back of the rear seat cushion assembly so that they are positioned as shown in the illustration.
Engage the hook of the rear seat cushion assembly to the CRS anchor bracket.
Engage the 2 rear seat cushion lock hooks to install the rear seat cushion assembly as shown in the illustration.
Confirm that the seat cushion is firmly installed.
When installing the seat cushion, make sure that the seat belt buckles are not under the seat cushion.
Engage the 2 clips.
3.INSTALL REAR SEATBACK ASSEMBLY LH
Place the rear seatback assembly LH in the cabin.
Be careful not to damage the vehicle body.
Install the rear seatback assembly LH with the 2 bolts.
Raise the rear seatback assembly LH.
4.INSTALL REAR SEATBACK ASSEMBLY RH
Place the rear seatback assembly RH in the cabin.
Be careful not to damage the vehicle body.
Install the rear seatback assembly RH with the 2 bolts.
Raise the rear seatback assembly RH.
58167H
5.INSTALL FRONT CENTER FLOOR COVER
Engage the 6 guides to install the front center floor cover.
58166B
6.INSTALL FRONT FLOOR COVER LH
Engage the 3 guides.
Engage the 3 clips.
Install the front floor cover LH with the 2 clips.
58165F
7.INSTALL FRONT FLOOR COVER RH
Engage the 3 guides.
Engage the 3 clips.
Install the front floor cover RH with the 2 clips.
71960B
8.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
71940A
9.INSTALL REAR SEAT HEADREST ASSEMBLY