Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2017.06
RM2170E _58 Vehicle Interior _057034 DOOR LOCK _0278072 POWER DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  SYSTEM DESCRIPTION  


POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION


a.

The power door lock control system locks/unlocks all the doors.

The main body ECU (multiplex network body ECU) receives lock/unlock request signals from a door control switch or the driver door key lock and unlock switch. Then, the main body ECU (multiplex network body ECU) sends these request signals to the door lock motors in each door to lock/unlock each door in response to the inputs.



FUNCTION OF MAIN COMPONENTS


Component Function
Power window regulator master switch assembly
·

Door control switch


Driver door control switch on power window regulator master switch assembly locks or unlocks all doors.
Door courtesy light switch assembly
·

Placed on each door.

·

Detects door status (open or closed) and outputs data to main body ECU (multiplex network body ECU).

·

Turns on when door is opened and turns off when door is closed.


Front door lock assembly LH*1
Front door lock assembly RH*2
·

Built-in motor locks or unlocks door.

·

Built-in key lock and unlock switch (key-linked) detects door key operation status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU).

·

Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked.


Front door lock assembly RH*1
Front door lock assembly LH*2
Rear door lock assembly LH/RH
·

Built-in motor locks or unlocks door.

·

Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked.


Back door lock assembly
·

Built-in motor unlatches door latch.

·

Performs back door open operation according to locked/unlocked state determination of main body ECU (multiplex network body ECU).

·

Built-in courtesy switch detects back door status (open or closed) and output data to main body ECU (multiplex network body ECU) turns on when back door is opened and turns off when back door is closed



*1: for LHD

*2: for RHD



SYSTEM FUNCTION


a.

This system is controlled by the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) outputs signals to each door lock motor. The power door lock control system has the following functions:

Function Outline
Manual lock and unlock function This function can lock or unlock all doors by the door control switch operation.
Key-linked lock and unlock function This function, which is linked with the mechanical key cylinder, can lock or unlock all doors when a lock or unlock operation is effected.
Manual unlock prohibition function When the condition below is met, unlocking the vehicle using the door control switch will be prohibited:
·

The doors are locked using a key-linked operation, wireless key operation or entry operation with all doors closed.


Key lock-in prevention function When the key is in the vehicle, performing the door lock operation will not lock the door.
Key-linked 2-step unlock function*1 Unlocks only the driver door by turning the key cylinder once and unlocks all of the doors by turning it twice.
Shift-linked automatic door lock function*1, *2 When the conditions listed below are met consecutively, this function causes all of the doors to be automatically locked:
·

all of the doors are closed.

·

Power switch is on (IG).

·

With the shift lever in P, the shift lever is moved to any position other than P.

·

Any of the doors is unlocked.


Speed-sensitive automatic door lock function*1 When the conditions listed below are met consecutively, this function causes all of the doors to be automatically locked:
·

Vehicle speed is higher than approximately 20 km/h (12 mph).

·

all of the doors are closed.

·

Any of the doors is unlocked.


Shift-linked automatic door unlock function*1 When the conditions listed below are met consecutively, this function causes all of the doors to be automatically unlocked:
·

Power switch is on (IG).

·

With the shift lever in any position other than P, the shift lever is moved to P.


Driver door-linked automatic door unlock*1, *2 all of the doors are unlocked automatically when the driver door is opened within approximately 43 seconds of the power switch being turned from on (IG) to off.

*1: w/ Canister Pump Module

*2: This function will operate if the corresponding customize setting is set to "ON".