Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › FUEL TANK CAP(w/ Canister Pump Module) › from 2017.06
RM2170E _51 Engine / Hybrid System _057007 1NZ-FXE EMISSION CONTROL _0320448 FUEL TANK CAP(w/ Canister Pump Module) G

1NZ-FXE EMISSION CONTROL  FUEL TANK CAP(w/ Canister Pump Module)  INSPECTION  


PROCEDURE

Hide 77310A 1.INSPECT FUEL TANK CAP ASSEMBLY

a.
A310388C01
2.417,1.26 2.719,1.604 2.719,1.604 2.875,1.604 false 2.969,1.51 3.281,1.708 0.313,0.198 10 false *a
*a Gasket


Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.

If the result is not as specified, replace the fuel tank cap assembly.


b.
A316056C01
1.865,1.813 2.833,1.813 true 2.906,1.729 3.229,1.979 0.323,0.25 10 false *a
*a ID Mark


Confirm that ID mark V is printed on the fuel tank cap assembly.

CAUTION:

Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system.