Home › General › SPECIFICATIONS › 1NZ-FXE EMISSION CONTROL › from 2017.06
RM2170E _V1 General _057001 SPECIFICATIONS _0277858 1NZ-FXE EMISSION CONTROL F

SPECIFICATIONS  1NZ-FXE EMISSION CONTROL  TORQUE SPECIFICATIONS  


EGR VALVE AND EGR COOLER
Part Tightened N*m kgf*cm ft.*lbf
Wire harness clamp bracket x EGR valve assembly 13 127 9
EGR valve assembly x EGR cooler sub-assembly 25 255 18
Stud bolt x EGR valve assembly 9.0 92 80 in.*lbf
EGR valve bracket x EGR valve assembly and Cylinder head 25 255 18
EGR pipe assembly x Intake manifold 10 102 7
EGR pipe assembly x EGR valve assembly 25 255 18

EGR COOLER
Part Tightened N*m kgf*cm ft.*lbf
Stud bolt x EGR cooler assembly 9.0 92 80 in.*lbf
EGR cooler assembly x No. 1 EGR pipe 25 255 18
EGR cooler assembly x Cylinder head 25 255 18

VACUUM SENSOR
Part Tightened N*m kgf*cm ft.*lbf
Manifold absolute pressure sensor x Intake manifold 7.1 72 63 in.*lbf

CANISTER
Part Tightened N*m kgf*cm ft.*lbf
Charcoal canister assembly x Body 19 194 14
Charcoal canister support bracket assembly x Charcoal canister assembly 8.4 55 48 in.*lbf
Charcoal canister base bracket assembly x Charcoal canister assembly 8.4 55 48 in.*lbf

PCV VALVE
Part Tightened N*m kgf*cm ft.*lbf
Ventilation valve sub-assembly x Cylinder head cover sub-assembly without 19 mm ball joint lock nut wrench 27 275 20
with 19 mm ball joint lock nut wrench 14 143 10