Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module) › from 2017.06
RM2170E _51 Engine / Hybrid System _057006 1NZ-FXE FUEL _0320559 FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module) A

1NZ-FXE FUEL  FUEL SENDER GAUGE ASSEMBLY(w/o Canister Pump Module)  REMOVAL  


PROCEDURE

Hide 77020A 1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 83320 2.REMOVE FUEL SENDER GAUGE ASSEMBLY

a.

for Type A:

i.
A339037

Disconnect the fuel sender gauge assembly connector.


ii.

Disengage the 5 clamps.



b.

for Type B:

i.
A420357

Disengage the 4 clamps.


ii.

Disconnect the fuel sender gauge assembly connector.



c.
A339038C03
1.052,0.667 1.115,0.396 1.115,0.396 1.198,0.396 true 0.396,1.708 0.396,1.427 0.396,1.427 0.656,1.198 true 1.24,0.333 1.375,0.49 0.135,0.156 10 true A 0.323,1.708 0.635,1.865 0.313,0.156 10 false *a
*a Resistance Plate and Contacts
V100135

Push
V100136

Pull up


Push the claw (A) of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

NOTICE:
·

Do not touch the resistance plate and contacts of the fuel sender gauge assembly.

·

Be careful not to bend the arm of the fuel sender gauge assembly.