Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2017.06
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0278210 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

When removing the name plates or emblems, heat the vehicle body and name plates or emblems using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate or Emblem 20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body, name plates or emblems excessively.


PROCEDURE

Hide 75431 1.REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM

a.
B307368C01
1.021,1.458 1.313,1.458 false 0.729,2.313 1.021,2.313 false 0.635,3.708 0.969,3.708 true 2.646,3.917 2.375,3.917 true 0.573,2.219 0.781,2.396 0.208,0.177 10 false *a 0.833,1.365 1.042,1.542 0.208,0.177 10 false *b 0.479,3.615 0.688,3.792 0.208,0.177 10 false *c 2.677,3.833 2.885,4.01 0.208,0.177 10 false *c
*a Wooden Blocks
*b Protective Tape
*c Location Pin


Apply protective tape around the luggage compartment door emblem as shown in the illustration.


b.

Insert a piano wire between the vehicle body and luggage compartment door emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the luggage compartment door emblem to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the luggage compartment door emblem.


Hide 75441D 2.REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for LH Side)

a.
B310566C01
2.719,0.427 2.448,0.427 true 2.167,1.094 1.896,1.094 true 2.74,0.354 2.927,0.531 0.188,0.177 10 true *a 2.198,1.021 2.385,1.198 0.188,0.177 10 true *b
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the No. 1 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the No. 1 luggage compartment door name plate.


Hide 75441A 3.REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for RH Side)

a.
B485079C01
2.417,0.438 2.823,0.438 true 1.771,0.865 2.177,0.865 true 2.375,2.813 2.781,2.813 true 1.74,3.281 2.146,3.281 true 0.156,0.135 0.531,0.375 0.375,0.24 12 true *A 0.167,2.563 0.542,2.802 0.375,0.24 12 true *B 2.854,0.365 3.167,0.563 0.313,0.198 10 true *a 2.24,0.781 2.552,0.979 0.313,0.198 10 true *b 2.833,2.74 3.146,2.938 0.313,0.198 10 true *a 2.188,3.198 2.5,3.396 0.313,0.198 10 true *b
*A for Type A
*B for Type B
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the No. 1 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 1 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the No. 1 luggage compartment door name plate.


Hide 75442 4.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (for Type A)

a.
B310567C01
2.583,0.333 2.313,0.333 true 2.281,1.104 2,1.104 true 2.604,0.25 2.76,0.417 0.156,0.167 10 false *a 2.313,1.031 2.51,1.219 0.198,0.188 10 true *b
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the No. 2 luggage compartment door name plate.


Hide 75442 5.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (for Type B)

a.
B307366C01
0.906,1.031 1.135,1.031 true 2.708,0.427 2.542,0.427 true 2.75,0.354 2.948,0.51 0.198,0.156 10 true *a 0.719,0.948 0.917,1.104 0.198,0.156 10 true *b
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.


b.

Insert a piano wire between the vehicle body and No. 2 luggage compartment door name plate.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the No. 2 luggage compartment door name plate.


Hide 75374 6.REMOVE SIDE PANEL EMBLEM (for LH Side)

a.
B307365C01
2.667,0.417 2.396,0.417 true 1.365,1.458 1.021,1.458 true 2.719,0.344 2.906,0.5 0.188,0.156 10 true *a 0.823,1.354 1.01,1.51 0.188,0.156 10 true *b
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the side panel emblem as shown in the illustration.


b.

Insert a piano wire between the vehicle body and side panel emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the side panel emblem.


Hide 75374 7.REMOVE SIDE PANEL EMBLEM (for RH Side)

a.
B307364C01
0.75,0.365 1.083,0.365 true 2.031,1.365 2.365,1.365 true 0.563,0.281 0.75,0.469 0.188,0.188 10 true *a 2.385,1.271 2.573,1.458 0.188,0.188 10 true *b
*a Wooden Blocks
*b Protective Tape


Apply protective tape around the side panel emblem as shown in the illustration.


b.

Insert a piano wire between the vehicle body and side panel emblem.


c.

Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.


d.

Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body.

NOTICE:

Be careful not to damage the vehicle body.



e.

Remove the side panel emblem.