When installing the name plates or emblems, heat the vehicle body and name plates or emblems using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Name Plate or Emblem | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body, name plates or emblems excessively.
75431
1.INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the luggage compartment door emblem.
Using a heat light, heat the vehicle body and a new luggage compartment door emblem.
Remove the release paper from the luggage compartment door emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
| *a | Location Pin |
Install the luggage compartment door emblem as shown in the illustration.
75441D
2.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for LH Side)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the No. 1 luggage compartment door name plate.
Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Back Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 149.9 mm (5.90 in.) | B | 167.1 mm (6.58 in.) |
| B | 150.3 mm (5.92 in.) | - | - |
75441A
3.INSTALL NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for RH Side)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the No. 1 luggage compartment door name plate.
Using a heat light, heat the vehicle body and a new No. 1 luggage compartment door name plate.
Remove the release paper from the No. 1 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 1 luggage compartment door name plate as shown in the illustration.
| *A | for Type A | *B | for Type B |
| *a | Profile of Back Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 329.8 mm (1.08 ft.) | B | 146.6 mm (5.77 in.) |
| C | 329.5 mm (1.08 ft.) | D | 159.2 mm (6.27 in.) |
| E | 125.5 mm (4.94 in.) | F | 159.0 mm (6.26 in.) |
75442
4.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (for Type A)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the No. 2 luggage compartment door name plate.
Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Back Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 151.1 mm (5.95 in.) | B | 219.3 mm (8.63 in.) |
| C | 149.5 mm (5.89 in.) | - | - |
75442
5.INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE (for Type B)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the No. 2 luggage compartment door name plate.
Using a heat light, heat the vehicle body and a new No. 2 luggage compartment door name plate.
Remove the release paper from the No. 2 luggage compartment door name plate.
After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the No. 2 luggage compartment door name plate as shown in the illustration.
| *a | Profile of Back Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 150.1 mm (5.91 in.) | B | 165.9 mm (6.53 in.) |
| C | 150.0 mm (5.91 in.) | - | - |
75374
6.INSTALL SIDE PANEL EMBLEM (for LH Side)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the side panel emblem.
Using a heat light, heat the vehicle body and a new side panel emblem.
Remove the release paper from the side panel emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
w/ Location Pin:
Install the side panel emblem as shown in the illustration.
| *a | Location Pin | - | - |
w/o Location Pin:
Install the side panel emblem as shown in the illustration.
| *a | R End | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 161.2 mm (6.35 in.) | B | 44.8 mm (1.76 in.) |
| C | 174.2 mm (6.86 in.) | D | 97.3 mm (3.83 in.) |
75374
7.INSTALL SIDE PANEL EMBLEM (for RH Side)
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove any remaining double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the side panel emblem.
Using a heat light, heat the vehicle body and a new side panel emblem.
Remove the release paper from the side panel emblem.
After removing the release paper, keep the exposed adhesive free from foreign matter.
w/ Location Pin:
Install the side panel emblem as shown in the illustration.
| *a | Location Pin | - | - |
w/o Location Pin:
Install the side panel emblem as shown in the illustration.
| *a | R End | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 162.8 mm (6.41 in.) | B | 38.1 mm (1.50 in.) |
| C | 168.4 mm (6.63 in.) | D | 102.0 mm (4.02 in.) |