47731
1.REMOVE FRONT DISC BRAKE PISTON
| *a | Cloth |
Place a piece of cloth between the front disc brake piston and disc brake cylinder.
Apply compressed air to remove the front disc brake piston from the disc brake cylinder.
Do not place your fingers in front of the piston when using compressed air.
Do not allow any brake fluid to spatter.
2.REMOVE CYLINDER BOOT
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot from the disc brake cylinder.
Be careful not to damage the disc brake cylinder.
3.REMOVE PISTON SEAL
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the disc brake cylinder.
Do not damage the inner surface or piston seal groove of the disc brake cylinder.
31478B
4.REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP
Remove the front disc brake bleeder plug cap from the front disc brake bleeder plug.
47547B
5.REMOVE FRONT DISC BRAKE BLEEDER PLUG
Remove the front disc brake bleeder plug from the disc brake cylinder.