Be sure to correctly follow the removal and installation procedures for the front seat airbag sub-assemblies.
73906
1.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the front seat airbag sub-assemblies installed on the vehicle.
The defects are as follows:
Cuts on the front seat cushion assembly around the front seat airbag sub-assemblies
Small cracks on the front seat cushion assembly around the front seat airbag sub-assemblies
Significant discoloration on the front seat cushion assembly around the front seat airbag sub-assemblies
No defects are found.
If any of the defects is found, replace the separate type front seat cushion pad or separate type front seat cushion cover with a new one.
73906
2.INSPECT FRONT SEAT AIRBAG SUB-ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR).
Visually check for defects with the front seat airbag sub-assemblies removed from the vehicle.
The defects are as follows:
Cuts
Small cracks
Significant discoloration
Cracks or other damage to the connector
No defects are found.
If any of the defects is found, replace the front seat airbag sub-assembly with a new one.