Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM › from 2017.06
RM2170E _58 Vehicle Interior _057039 SUPPLEMENTAL RESTRAINT SYSTEMS _0321828 OCCUPANT CLASSIFICATION SYSTEM L

SUPPLEMENTAL RESTRAINT SYSTEMS  OCCUPANT CLASSIFICATION SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:


System See Procedure
Power Door Lock Control System (Click here)


GENERAL PRECAUTION


Perform zero point calibration and sensitivity check if any of the following conditions occur:
·

The occupant detection ECU is replaced.

·

Accessories (seatback tray, seat cover, etc.) are installed.

·

The front passenger seat is removed from the vehicle.

·

One of the bolts that is used to install the front passenger seat is removed and reinstalled.

·

The passenger airbag ON/OFF indicator ("ON") comes on when the front passenger seat is not occupied.

·

An occupant classification sensor collision detection DTC is output due to an accident or a collision.