FAIL-SAFE FUNCTION
The following chart shows the status of the controls when the system is normal and malfunctioning.
The passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then turns off for approximately 2 seconds.
Approximately 6 seconds after the power switch is turned on (IG), the passenger airbag ON/OFF indicator will indicate ON or OFF depending on the conditions listed below.
| Condition | ON Indicator | OFF Indicator | Instrument Panel Passenger Airbag Assembly | Front Seat Airbag Assembly RH | Front Seat Airbag Sub-assembly RH | Curtain Shield Airbag Assembly RH | Front Seat Outer Belt Assembly RH |
|---|---|---|---|---|---|---|---|
| Adult is seated. | ON | OFF | ○ | ○ | ○* | ○ | ○ |
| Child is seated. | OFF | ON | X | ○ | X | ○ | ○ |
| Child restraint system is installed. | OFF | ON | X | ○ | X | ○ | ○ |
| Vacant | OFF | ON | X | ○ | X | ○ | ○ |
| Failure | OFF | ON | X | ○ | X | ○ | ○ |
○: Deployable
X: Not deployable
*: Not be deployed when the front passenger seat belt has been unfastened.