Home › Vehicle Exterior › LIGHTING (EXT) › DAYTIME RUNNING LIGHT ASSEMBLY › from 2017.06
RM2170E _59 Vehicle Exterior _057049 LIGHTING (EXT) _0320154 DAYTIME RUNNING LIGHT ASSEMBLY G

LIGHTING (EXT)  DAYTIME RUNNING LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81440B 1.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH

E329990C03
0.979,1.802 1.396,1.385 false 2.479,1.771 2.01,1.396 false 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.938,1.833 1.281,2.083 0.344,0.25 10 false B 2.51,1.813 2.854,2.063 0.344,0.25 10 false E
*a Component without harness connected
(Daytime Running Light Assembly LH)


a.

Apply auxiliary battery voltage to the daytime running light assembly LH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
Daytime running light comes on


If the result is not as specified, replace the daytime running light assembly LH.


Hide 81430C 2.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH

E329990C03
0.979,1.802 1.396,1.385 false 2.479,1.771 2.01,1.396 false 0.344,0.26 0.656,0.458 0.313,0.198 10 false *a 0.938,1.833 1.281,2.083 0.344,0.25 10 false B 2.51,1.813 2.854,2.063 0.344,0.25 10 false E
*a Component without harness connected
(Daytime Running Light Assembly RH)


a.

Apply auxiliary battery voltage to the daytime running light assembly RH and check that the light comes on.

OK:
Condition Specified Condition
Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 1 (E)
Daytime running light comes on


If the result is not as specified, replace the daytime running light assembly RH.