Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › from 2017.06
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277924 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  P062F-489  Internal Control Module EEPROM Error  


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and will store the DTC when it detects an internal malfunction.

DTC No. INF Code DTC Detection Condition Trouble Area
P062F 489 ECU internal malfunction
(1 trip detection logic)
Hybrid vehicle control ECU

CONFIRMATION DRIVING PATTERN

1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the Techstream on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off. and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the Techstream on.

6.

With power switch on (IG) and wait for 30 seconds or more.

7.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.

8.

Read the current DTCs.

HINT:
·

If a current DTC is output, the system is malfunctioning.

·

If a current DTC is not output, perform the following procedure.




PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU

NEXT

COMPLETED