52131A
1.INSTALL FRONT BUMPER REINFORCEMENT
for LHD:
Install the front bumper reinforcement with the 6 bolts.
Engage the 2 clamps to install the wire harness.
for RHD:
Install the front bumper reinforcement with the 6 bolts.
Engage the 3 clamps to install the wire harness.
53936D
2.INSTALL FRONT END PANEL PROTECTOR LH (w/ Front Spoiler)
Engage the guide.
Install the front end panel protector LH with the 3 bolts.
52611
3.INSTALL FRONT BUMPER ENERGY ABSORBER
Engage the 2 guides to install the front bumper energy absorber.
53287B
4.INSTALL RADIATOR SUPPORT EXTENSION RH
Engage the 2 claws to install the radiator support extension RH.
53288B
5.INSTALL RADIATOR SUPPORT EXTENSION LH
Engage the 2 claws to install the radiator support extension LH.
Engage the 2 clamps to install the thermistor assembly.
53285B
6.INSTALL NO. 1 RADIATOR SIDE AIR SEAL
Engage the 2 claws to install the No. 1 radiator side air seal.
53286B
7.INSTALL NO. 2 RADIATOR SIDE AIR SEAL
Engage the 2 claws to install the No. 2 radiator side air seal.
53289A
8.INSTALL RADIATOR SUPPORT OPENING COVER
Install the radiator support opening cover with the 4 clips.
52536
9.INSTALL FRONT BUMPER SIDE RETAINER LH
Engage the 2 claws.
Engage the clip as shown in the illustration.
Install the front bumper side retainer LH with the bolt.
52535
10.INSTALL FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52129B
11.INSTALL LOWER FRONT BUMPER COVER
Engage the 7 claws.
| *1 | Outside Moulding Retainer |
Install the 2 screws.
Install the lower front bumper cover with the 2 outside moulding retainers.
75311
12.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Engage the 2 guides and 4 claws.
Install the radiator grille (or front panel) emblem with the 2 screws.
53112E
13.INSTALL LOWER NO. 1 RADIATOR GRILLE
Engage the 20 claws.
Install the lower No. 1 radiator grille with the screw.
53122E
14.INSTALL LOWER RADIATOR GRILLE MOULDING
Engage the 2 guides and 6 claws.
Install the lower radiator grille moulding with the 2 screws.
53122B
15.INSTALL NO. 2 RADIATOR GRILLE MOULDING
| *a | Hook |
Engage the hook.
Engage the 4 claws to install the No. 2 radiator grille moulding.
52521B
16.INSTALL UPPER FRONT BUMPER RETAINER
Install the upper front bumper retainer with the 4 clips.
53395E
17.INSTALL HOOD TO FRONT END PANEL SEAL
Engage the 15 clips to install the hood to front end panel seal.
81482C
18.INSTALL FOG LIGHT COVER LH
Engage the 8 claws to install the fog light cover LH.
81481E
19.INSTALL FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81220
20.INSTALL FOG LIGHT ASSEMBLY LH
81210A
21.INSTALL FOG LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
76851
22.INSTALL FRONT SPOILER COVER (w/ Front Spoiler)
52114A
23.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET
Engage the 2 claws.
Install the front bumper extension mounting bracket with the 2 screws.