81920
1.REMOVE REFLEX REFLECTOR ASSEMBLY LH
Remove the screw.
Disengage the claw to remove the reflex reflector assembly LH.
81910
2.REMOVE REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
52576
3.REMOVE REAR BUMPER SIDE RETAINER LH
Remove the screw.
Disengage the 2 claws and guide and remove the rear bumper side retainer LH.
52575
4.REMOVE REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52563A
5.REMOVE UPPER REAR BUMPER RETAINER LH
Remove the screw.
Disengage the 2 claws and remove the upper rear bumper retainer LH.
52562B
6.REMOVE UPPER REAR BUMPER RETAINER RH
Use the same procedure as for the LH side.
52164A
7.REMOVE REAR BUMPER PLATE LH (w/o Reinforcement)
Remove the 3 bolts and rear bumper plate LH.
52163A
8.REMOVE REAR BUMPER PLATE RH (w/o Reinforcement)
Use the same procedure as for the LH side.
52171A
9.REMOVE NO. 1 REAR BUMPER REINFORCEMENT (w/ Reinforcement)
Remove the 4 bolts and No. 1 rear bumper reinforcement.
52016A
10.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH (w/ Reinforcement)
Remove the 3 bolts and rear bumper arm sub-assembly LH.
52015A
11.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH (w/ Reinforcement)
Use the same procedure as for the LH side.
52592
12.REMOVE REAR BUMPER SIDE SEAL LH
Using a clip remover, remove the 2 clips and rear bumper side seal LH.
52591
13.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.