Home › General › SPECIFICATIONS › 1NZ-FXE BATTERY / CHARGING › from 2017.06
RM2170E _V1 General _057001 SPECIFICATIONS _0277881 1NZ-FXE BATTERY / CHARGING F

SPECIFICATIONS  1NZ-FXE BATTERY / CHARGING  SERVICE DATA  


Auxiliary battery Standard voltage 12.0 V or higher at 20°C (68°F)
Fuse Standard resistance Below 1 Ω

RECHARGE AUXILIARY BATTRRY
Charge Method Charging Current
Normal Below 5 A
Quick Below 15 A

DC/DC CONVERTER
Item Tester Connection Condition Specified Condition
Current flowing from auxiliary battery Positive (+) auxiliary battery cable Ignition switch ON (READY)
(The high beam headlights are on, the blower motor switch is in the HI position, and the rear window defogger is turned on.)
Below 0 A
(No current from auxiliary battery)
Auxiliary battery voltage Positive (+) auxiliary battery terminal - Negative (-) auxiliary battery terminal 13 to 15 V

BATTERY THERMOMETER SENSOR
Tester Connection Condition Specified Condition
1 - 2 10°C (50°F) 3.00 to 3.73 kΩ
15°C (59°F) 2.45 to 2.88 kΩ
20°C (68°F) 1.95 to 2.30 kΩ
25°C (77°F) 1.60 to 1.80 kΩ
30°C (86°F) 1.28 to 1.47 kΩ
35°C (95°F) 1.00 to 1.22 kΩ
40°C (104°F) 0.80 to 1.00 kΩ
45°C (113°F) 0.65 to 0.85 kΩ
50°C (122°F) 0.50 to 0.70 kΩ
55°C (131°F) 0.44 to 0.60 kΩ
60°C (140°F) 0.36 to 0.50 kΩ