81440B
1.REMOVE DAYTIME RUNNING LIGHT ASSEMBLY LH
81430C
2.REMOVE DAYTIME RUNNING LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52126D
3.REMOVE FOG LIGHT MOUNTING BRACKET LH
Remove the 3 screws and fog light mounting bracket LH.
52125A
4.REMOVE FOG LIGHT MOUNTING BRACKET RH
Use the same procedure as for the LH side.
81482C
5.REMOVE FOG LIGHT COVER LH
Disengage the 9 claws to remove the fog light cover LH.
81481E
6.REMOVE FOG LIGHT COVER RH
Use the same procedure as for the LH side.
53395E
7.REMOVE HOOD TO FRONT END PANEL SEAL
Disengage the 15 clips and remove the hood to front end panel seal.
52521B
8.REMOVE UPPER FRONT BUMPER RETAINER
Using a clip remover, remove the 4 clips and upper front bumper retainer.
52127C
9.REMOVE FRONT BUMPER HOLE COVER
| *a | Hook |
Disengage the 2 claws.
Disengage the hook to remove the front bumper hole cover.
52114A
10.REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET
Remove the 2 screws.
Disengage the 2 claws to remove the front bumper extention mounting bracket.
53111
11.REMOVE RADIATOR GRILLE
Remove the screw.
Disengage the 13 claws to remove the radiator grille.
75311
12.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Remove the 2 screws.
Disengage the 4 claws and 2 guides to remove the radiator grille (or front panel) emblem.
52411
13.REMOVE FRONT BUMPER GUARD
Remove the 6 screws.
Using a screwdriver, disengage the 8 claws to remove the front bumper guard.
| *a | Protective Tape | - | - |
Tape the screwdriver tip before use.
53113E
14.REMOVE LOWER NO. 2 RADIATOR GRILLE
Remove the 2 screws.
Disengage the 6 claws to remove the lower No. 2 radiator grille.
52129B
15.REMOVE LOWER FRONT BUMPER COVER
Remove the 2 screws.
Using a clip remover, remove the 2 clips.
| *1 | Outside Moulding Retainer | - | - |
Remove the 6 outside moulding retainers.
Disengage the 10 claws to remove the lower front bumper cover.
52536
16.REMOVE FRONT BUMPER SIDE RETAINER LH
Remove the bolt.
Disengage the clip as shown in the illustration.
Disengage the 2 claws to remove the front bumper side retainer LH.
52535
17.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
53289A
18.REMOVE RADIATOR SUPPORT OPENING COVER
Using a clip remover, remove the 4 clips and radiator support opening cover.
53286B
19.REMOVE NO. 2 RADIATOR SIDE AIR SEAL
Disengage the 2 claws and remove the No. 2 radiator side air seal.
53285B
20.REMOVE NO. 1 RADIATOR SIDE AIR SEAL
Disengage the 2 claws and remove the No. 1 radiator side air seal.
53288B
21.REMOVE RADIATOR SUPPORT EXTENSION LH
Disengage the 2 clamps to disconnect the thermistor assembly.
Disengage the 2 claws and remove the radiator support extension LH.
53287B
22.REMOVE RADIATOR SUPPORT EXTENSION RH
Disengage the 2 claws and remove the radiator support extension RH.
52611
23.REMOVE FRONT BUMPER ENERGY ABSORBER
Disengage the 2 guides to remove the front bumper energy absorber.
52131A
24.REMOVE FRONT BUMPER REINFORCEMENT
Disengage the 2 clamps to separate the wire harness.
Remove the 6 bolts and front bumper reinforcement.