52131A
1.INSTALL FRONT BUMPER REINFORCEMENT
Install the front bumper reinforcement with the 6 bolts.
Engage the 2 clamps to install the wire harness.
52611
2.INSTALL FRONT BUMPER ENERGY ABSORBER
Engage the 2 guides to install the front bumper energy absorber.
53288B
3.INSTALL RADIATOR SUPPORT EXTENSION LH
Engage the 2 claws to install the radiator support extension LH.
Engage the 2 clamps to connect the thermistor assembly.
53287B
4.INSTALL RADIATOR SUPPORT EXTENSION RH
Engage the 2 claws to install the radiator support extension RH.
53286B
5.INSTALL NO. 2 RADIATOR SIDE AIR SEAL
Engage the 2 claws to install the No. 2 radiator side air seal.
53285B
6.INSTALL NO. 1 RADIATOR SIDE AIR SEAL
Engage the 2 claws to install the No. 1 radiator side air seal.
53289A
7.INSTALL RADIATOR SUPPORT OPENING COVER
Install the radiator support opening cover with the 4 clips.
52536
8.INSTALL FRONT BUMPER SIDE RETAINER LH
Engage the 2 claws.
Engage the clip as shown in the illustration.
Install the front bumper side retainer LH with the bolt.
52535
9.INSTALL FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52129B
10.INSTALL LOWER FRONT BUMPER COVER
Engage the 10 claws.
| *1 | Outside Moulding Retainer | - | - |
Install the 2 clips.
Install the 6 outside moulding retainers.
Install the lower front bumper cover with the 2 screws.
53113E
11.INSTALL LOWER NO. 2 RADIATOR GRILLE
Engage the 6 claws.
Install the lower No. 2 radiator grille with the 2 screws.
52411
12.INSTALL FRONT BUMPER GUARD
Engage the 8 claws.
Install the front bumper guard with the 6 screws.
75311
13.INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Engage the 2 guides and 4 claws.
Install the radiator grille (or front panel) emblem with the 2 screws.
53111
14.INSTALL RADIATOR GRILLE
Engage the 13 claws.
Install the radiator grille with the screw.
52114A
15.INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET
Engage the 2 claws.
Install the front bumper extension mounting bracket with the 2 screws.
52127C
16.INSTALL FRONT BUMPER HOLE COVER
| *a | Hook |
Engage the hook.
Engage the 2 claws to install the front bumper hole cover.
52521B
17.INSTALL UPPER FRONT BUMPER RETAINER
Install the upper front bumper retainer with the 4 clips.
53395E
18.INSTALL HOOD TO FRONT END PANEL SEAL
Engage the 15 clips to install the hood to front end panel seal.
81482C
19.INSTALL FOG LIGHT COVER LH
Engage the 9 claws to install the fog light cover LH.
81481E
20.INSTALL FOG LIGHT COVER RH
Use the same procedure as for the LH side.
52126D
21.INSTALL FOG LIGHT MOUNTING BRACKET LH
Install the fog light mounting bracket LH with the 3 screws.
52125A
22.INSTALL FOG LIGHT MOUNTING BRACKET RH
Use the same procedure as for the LH side.
81440B
23.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY LH
81430C
24.INSTALL DAYTIME RUNNING LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.