81920
1.REMOVE REFLEX REFLECTOR ASSEMBLY LH
Remove the screw.
Disengage the 2 claws to remove the reflex reflector assembly LH.
81910
2.REMOVE REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
52405B
3.REMOVE REAR BUMPER GUARD SUB-ASSEMBLY
| *1 | Outside Moulding Retainer |
Remove the 2 screws and 4 outside moulding retainers.
Disengage the 8 claws to remove the rear bumper guard sub-assembly.
52453
4.REMOVE REAR BUMPER GUARD CENTER
Using a clip remover, remove the 2 clips.
| *1 | Outside Moulding Retainer | - | - |
Remove the 6 outside moulding retainers.
Disengage the 10 claws to remove the rear bumper guard center.
52576
5.REMOVE REAR BUMPER SIDE RETAINER LH
Remove the screw.
Disengage the 2 claws and guide to remove the rear bumper side retainer LH.
52575
6.REMOVE REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52563A
7.REMOVE UPPER REAR BUMPER RETAINER LH
Remove the screw.
Disengage the 2 claws to remove the upper rear bumper retainer LH.
52562B
8.REMOVE UPPER REAR BUMPER RETAINER RH
Use the same procedure as for the LH side.
52171A
9.REMOVE NO. 1 REAR BUMPER REINFORCEMENT
Remove the 4 bolts and No. 1 rear bumper reinforcement.
52016A
10.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH
Remove the 3 bolts and rear bumper arm sub-assembly LH.
52015A
11.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH
Use the same procedure as for the LH side.