Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(w/ Wheel Opening Moulding) › from 2018.08
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0364197 REAR BUMPER(w/ Wheel Opening Moulding) A

EXTERIOR PANELS / TRIM  REAR BUMPER(w/ Wheel Opening Moulding)  REASSEMBLY  


PROCEDURE

Hide 52016A 1.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B481711

Install the rear bumper arm sub-assembly LH with the 3 bolts.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 52015A 2.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52171A 3.INSTALL NO. 1 REAR BUMPER REINFORCEMENT

a.
B481710

Install the No. 1 rear bumper reinforcement with the 4 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 52563A 4.INSTALL UPPER REAR BUMPER RETAINER LH

a.
B307358

Engage the 2 claws.


b.

Install the upper rear bumper retainer LH with the screw.


Hide 52562B 5.INSTALL UPPER REAR BUMPER RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52576 6.INSTALL REAR BUMPER SIDE RETAINER LH

a.
B297206

Engage the guide and 2 claws.


b.

Install the rear bumper side retainer LH with the screw.


Hide 52575 7.INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52453 8.INSTALL REAR BUMPER GUARD CENTER

a.

Engage the 10 claws to install the rear bumper guard center.

B481708C01
4.521,2.74 4.813,2.74 true 4.792,2.656 4.958,2.823 0.167,0.167 10 true *1
*1 Outside Moulding Retainer - -



b.

Install the 2 clips and 6 outside moulding retainers.


Hide 52405B 9.INSTALL REAR BUMPER GUARD SUB-ASSEMBLY

a.

Engage the 8 claws to install the rear bumper guard sub-assembly.

B481707


b.
B481706C01
1.156,1.76 1.323,1.948 false 1.302,1.958 1.615,2.115 0.313,0.156 10 false *1
*1 Outside Moulding Retainer


Install the 2 screws and 4 outside moulding retainers.


Hide 81920 10.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.
B481705

Engage the 2 claws.


b.

Install the reflex reflector assembly LH with the screw.


Hide 81910 11.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.