Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WHEEL OPENING MOULDING(for Front Side) › from 2018.08
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0364198 WHEEL OPENING MOULDING(for Front Side) A

EXTERIOR PANELS / TRIM  WHEEL OPENING MOULDING(for Front Side)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 76926F 1.REMOVE SIDE MUDGUARD PROTECTOR

a.
B481720

Remove the side mudguard protector.

HINT:
B384421

Do not pull the side mudguard protector to remove it. Push the end of the side mudguard protector to peel it off.



b.

Using non-residue solvent and a cloth, wipe off any side mudguard protector remaining on the front fender moulding sub-assembly.