Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › ACOUSTIC VEHICLE ALERTING SYSTEM › from 2020.08
RM2170E _59 Vehicle Exterior _092812 ACOUSTIC VEHICLE ALERTING SYSTEM _0437693 ACOUSTIC VEHICLE ALERTING SYSTEM U

ACOUSTIC VEHICLE ALERTING SYSTEM  ACOUSTIC VEHICLE ALERTING SYSTEM  TERMINALS OF ECU  


CHECK VEHICLE APPROACHING SPEAKER CONTROLLER


B345454N27
3.302,0.094 3.854,0.354 0.552,0.26 3.458,0.135 4.177,0.365 0.719,0.229 10 false G97

a.

Disconnect the G97 vehicle approaching speaker controller connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G97-1 (IG) - Body ground LG - Body ground IG power supply Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
G97-6 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Connect the G97 vehicle approaching speaker controller connector.


d.

Measure the check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G97-7 (SP+) - G97-8 (SP-) R - G Vehicle approaching speaker output Vehicle approaching speaker operating A waveform synchronized with the sound is output.
(See Waveform 1)
G97-3 (CANH) - G97-6 (GND) GR - W-B CAN communication line Power switch on (IG) Pulse generation
G97-4 (CANL) - G97-6 (GND) W - W-B CAN communication line Power switch on (IG) Pulse generation

i.
E403623

Waveform 1

Item Condition
Tester Connection G97-7 (SP+) - G97-8 (SP-)
Tool Setting 1 V/DIV., 500 ms./DIV.
Condition Vehicle approaching speaker operating