Home › Engine / Hybrid System › 2ZR-FXE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM2070E _51 Engine / Hybrid System _061905 2ZR-FXE ENGINE CONTROL _0301565 CAMSHAFT POSITION SENSOR A

2ZR-FXE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Although the part name refers to the No. 1 crank position sensor, this procedure is for the camshaft position sensor.


PROCEDURE

Hide 11101W 1.INSTALL NO. 1 CRANK POSITION SENSOR

a.
A158220

Apply a light coat of engine oil to the O-ring on the No. 1 crank position sensor.


b.

Install the No. 1 crank position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the No. 1 crank position sensor connector.


Hide 2.INSPECT FOR OIL LEAK