Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › 2014.11–2016.05
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301573 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  U0100-211  Lost Communication with ECM / PCM "A"  U0100-212  Lost Communication with ECM / PCM "A"  U0100-530  Lost Communication with ECM / PCM "A"  U0129-220  Lost Communication with Brake System Control Module  U0129-222  Lost Communication with Brake System Control Module  U0129-527  Lost Communication with Brake System Control Module  U0129-528  Lost Communication with Brake System Control Module  U0140-146  Communication Error from Body ECU to HV ECU  U0151-763  Communication Error from Airbag ECU to HV ECU  U0164-594  Communication Error from A/C ECU to HV ECU  U0164-827  Communication Error from A/C ECU to HV ECU  U1107-436  Lost Communication with Power Management Module  


DESCRIPTION

The power management control ECU transmits and receives signals via CAN communication to and from the ECM, skid control ECU assembly, power steering ECU assembly, main body ECU, airbag ECU assembly, and air conditioning amplifier assembly.


DTC No. INF Code DTC Detection Condition Trouble Area
U0100 211 Problem with CAN communication between the ECM and power management control ECU (communication error between ECUs) CAN communication system
212 Problem with CAN communication between the ECM and power management control ECU (signal transmission error)
530 Problem with CAN communication between the ECM and power management control ECU (CAN communication system malfunction)
U0129 220 Problem with CAN communication between the skid control ECU assembly and power management control ECU (no signal reception)
222 Problem with CAN communication between the skid control ECU assembly and power management control ECU (signal transmission error)
527 Problem with CAN communication (V BUS) between the skid control ECU assembly and power management control ECU (CAN communication system malfunction)
528 Problem with CAN communication between the skid control ECU assembly and power management control ECU (CAN communication system malfunction)
U0140 146 Problem with CAN communication between the main body ECU and power management control ECU (CAN communication system malfunction)
U0151 763 Problem with CAN communication between airbag ECU assembly and power management control ECU (CAN communication system malfunction)
U0164 594 Problem with CAN communication between the air conditioning amplifier assembly and power management control ECU (communication error between ECUs)
827 Problem with CAN communication between air conditioning amplifier assembly and power management control ECU (CAN communication system malfunction)
U1107 436 Problem with CAN communication between the power source ECU and power management control ECU (CAN communication system malfunction)

CAUTION / NOTICE / HINT

HINT:

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

1.

Turn the power switch on (IG) and wait for 2 minutes or more.



PROCEDURE

1.CHECK DTC OUTPUT (ALL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Check for DTCs of all systems by following the prompts on the GTS screen.


d.

Check if DTCs are output.

Result:
Result Proceed to
Power management control ECU outputs P2532-772 A
Power management control ECU does not output P2532-772 B



e.

Turn the power switch off.



A

B