Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SUB RADIATOR
RM2070E _51 Engine / Hybrid System _061906 HYBRID / BATTERY CONTROL _0301580 SUB RADIATOR A

HYBRID / BATTERY CONTROL  SUB RADIATOR  INSTALLATION  


PROCEDURE

Hide 1.INSTALL RADIATOR ASSEMBLY

a.

Install the radiator assembly to the condenser assembly with the 4 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)

NOTICE:

Do not remove the pieces of cloth or plastic bags from the pipes and disconnected hoses until installation.



Hide 88450 2.INSTALL COOLER CONDENSER ASSEMBLY