G3834
1.INSTALL SERVICE PLUG GRIP
Wear insulated gloves.
Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.
Connect the auxiliary battery on the same day of installing the service plug grip to allow the battery cell voltage equalization function of the battery smart unit to operate.
Wear insulated gloves and install the service plug grip in the order shown in the illustration.
Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.
G92Q7
2.INSTALL NO. 5 HYBRID BATTERY SHIELD PANEL
Install the No. 5 hybrid battery shield panel with the 3 claws in the order shown in the illustration.
3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
58821C
4.INSTALL UPPER CONSOLE PANEL
64995
5.INSTALL DECK FLOOR BOX RH
64993
6.INSTALL REAR DECK FLOOR BOX
58412A
7.INSTALL NO. 2 DECK BOARD
58411A
8.INSTALL NO. 1 DECK BOARD
58410B
9.INSTALL DECK BOARD ASSEMBLY