Home › Engine / Hybrid System › 2ZR-FXE (INTAKE / EXHAUST) › INTAKE MANIFOLD › 2012.03–2012.10
RM2070E _51 Engine / Hybrid System _061910 2ZR-FXE INTAKE / EXHAUST _0301617 INTAKE MANIFOLD A

2ZR-FXE INTAKE / EXHAUST  INTAKE MANIFOLD  INSTALLATION  


PROCEDURE

Hide 17111 1.INSTALL INTAKE MANIFOLD

a.

Install a new No. 1 intake manifold to head gasket to the intake manifold.


b.

Install the intake manifold with the 2 bolts and 2 nuts.

Torque:
28 N*m (286 kgf*cm, 21 ft.*lbf)


c.

Connect the fuel vapor feed hose and ventilation hose.


d.

Install a new O-ring to the engine oil level dipstick guide sub-assembly.


e.

Apply a light coat of engine oil to the O-ring.


f.
U110460E03
1.396,0.198 1.521,0.344 0.125,0.146 10 false A 2.104,0.896 2.229,1.042 0.125,0.146 10 false B

Install the engine oil level dipstick guide sub-assembly with the 2 bolts and connect the wire harness clamp.

Torque:
Bolt (A) : 28 N*m (286 kgf*cm, 21 ft.*lbf)
Bolt (B) : 21 N*m (214 kgf*cm, 15 ft.*lbf)


g.

Install the engine oil level dipstick.


h.
A212682

Connect the 2 wire harness clamps and 3 connectors.


Hide 89421 3.INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR

Hide 22210 5.INSTALL THROTTLE BODY ASSEMBLY