Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › TEMPERATURE SWITCH › 2012.03–2020.08
RM2070E _51 Engine / Hybrid System _061911 2ZR-FXE COOLING _0301625 TEMPERATURE SWITCH A

2ZR-FXE COOLING  TEMPERATURE SWITCH  REMOVAL  


PROCEDURE

Hide 89429E 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A251264

Disconnect the connector.


b.
A251265

Using a union nut wrench (19 mm), remove the engine coolant temperature sensor.

NOTICE:

Do not apply any excessive force to the heater pipe when removing the engine coolant temperature sensor.