17750A
1.REMOVE INLET AIR CLEANER ASSEMBLY
11409
2.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
3.DRAIN COOLANT (for Engine)
16031
4.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Disconnect the No. 2 radiator hose and No. 3 water by-pass hose.
| *1 | No. 2 Radiator Hose |
| *2 | No. 3 Water By-pass Hose |
Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.
Do not damage the water inlet with thermostat sub-assembly.
When disconnecting the No. 3 water by-pass hose, pinch the hose clamp, rotate the hose and pull it straight off the pipe.
Remove the 2 nuts, bolt and water inlet with thermostat sub-assembly.
Remove the gasket from the water inlet with thermostat sub-assembly.