Home › Engine / Hybrid System › 2ZR-FXE (COOLING) › COOLING FAN MOTOR
RM2070E _51 Engine / Hybrid System _061911 2ZR-FXE COOLING _0301628 COOLING FAN MOTOR A

2ZR-FXE COOLING  COOLING FAN MOTOR  INSTALLATION  


PROCEDURE

Hide 16363 1.INSTALL COOLING FAN MOTOR

a.

Install the cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


b.

Connect the 5 clamps.

NOTICE:

Be careful not to damage the connector.



Hide 16363A 2.INSTALL NO. 2 COOLING FAN MOTOR

a.

Install the No. 2 cooling fan motor with the 3 screws.

Torque:
3.9 N*m (40 kgf*cm, 35 in.*lbf)


Hide 16361 3.INSTALL FAN

a.

Install the fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16361B 4.INSTALL NO. 2 FAN

a.

Install the No. 2 fan with the nut.

Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)


Hide 16400 5.INSTALL RADIATOR ASSEMBLY