Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › 2014.11–2016.05
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301639 CRUISE CONTROL SYSTEM J

CRUISE CONTROL  CRUISE CONTROL SYSTEM  Cruise Main Indicator Light Circuit  


DESCRIPTION

·

The power management control ECU turns on the cruise control indicator light by sending indicator output demand signals to the combination meter sub-assembly using CAN communication.

·

The cruise control indicator light illuminates in green when the cruise control system has been turned on using the ON-OFF switch. If a malfunction is detected, the cruise control indicator light changes to amber (w/o multi-information display), or the cruise control indicator light goes out and a warning message is displayed (w/ multi-information display).

·

The cruise control indicator light circuit uses CAN communication. If the cruise control indicator light is not functioning correctly, check for CAN communication DTCs before troubleshooting this circuit.


WIRING DIAGRAM

E230248E17
0.845,2.258 2.638,2.428 1.793,0.170 10 : CAN Communication Line 0.217,1.725 3.637,2.090 3.421,0.365 10 Combination Meter Sub-assembly (Meter Circuit Plate) 0.217,1.57 0.517,1.738 0.301,0.167 10 L27 4.835,1.731 5.062,1.898 0.226,0.167 10 L6 4.923,0.691 5.357,0.865 0.434,0.174 10 CA1H 4.937,1.183 5.371,1.344 0.434,0.161 10 CA1L 2.106,0.677 2.540,0.907 0.434,0.230 10 CANH 2.106,1.183 2.540,1.413 0.434,0.230 10 CANL 2.609,0.505 2.820,0.661 0.211,0.156 10 19 4.668,0.505 4.880,0.661 0.211,0.156 10 25 4.668,1.019 4.880,1.175 0.211,0.156 10 24 2.609,1.028 2.820,1.184 0.211,0.156 10 20 4.835,1.907 6.941,2.104 2.106,0.197 10 Power Management Control ECU

PROCEDURE

1.PERFORM ACTIVE TEST USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Select the following menu items: Body Electrical / Combination Meter / Active Test.


e.

Check the cruise control indicator light by performing the Active Test.

Combination Meter
Tester Display Test Part Control Range Diagnostic Note
Indicat. Lamp Cruise Cruise control indicator light Cruise control indicator light (illuminated in green) ON / OFF -
Cruise Indicator Cruise control indicator light Cruise control indicator light (illuminated in amber) ON / OFF w/o multi-information display

OK:

The cruise control indicator light goes on or off.


Result
Result Proceed to
OK A
NG (w/ Multi-information Display) B
NG (w/o Multi-information Display) C



A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

B

REPLACE COMBINATION METER SUB-ASSEMBLY

C